Fertan Body protection, black, 1 l

FERTAN bodywork and stone guard form an elastic layer with a fine-grained structure, which provides a resistant protection against stones, road debris and water.

• 1 liter standard can
• Fast drying
• Overpaintable
• Colour: black
• Anti drone effect

Features:

• FERTAN body and stone guard protects against petrol, oil, water and salt. In addition, the product has excellent damping and sound absorbing properties.
• The product is made of synthetic resin and contains no bitumen or tar constituents. It can be over-painted with all common acrylic paints.
• Particularly good adhesion to steel, stainless steel, galvanized steel, aluminium  and polyester laminates.
• The 1 litre containers have a standard 38mm thread for connection to a underbody gun.

Application:

• Shake well before use.
• Before applying, clean and degrease the surface, eg FERTAN Silcone Remover.
• Cover areas and parts that are not to be coated. eg brakes, exhaust, catalytic converter, ect.

• Steel: degrease and if necessary grind.
• Galvanized sheets and Aluminium: matt with abrasive wool and degrease.
• Stainless steel: degrease.
• Polyester laminates: degrease, sand with sandpaper P80 - P120 and degrease again.
• When applied directly to steel, a primer is recommended.

• Apply with spray gun, nozzle approx. 4 mm and 2-4 bar working pressure. Lower pressure for an increased structure on the surface.

• 60 minutes after application at approx. 20 ° C at the earliest.

• 1 liter at 100 μm thickness sufficient for approx. 3-4 m² area.

Storage:

• Store in dry and cool room, avoid direct sunlight.
• Protect from ignition and heat sources.
• Can be stored at 20 ° C for approx. 2 years in the original unopened container.