Fertan MM30 Multi Metal Coating 400 ml Spray

Features:

• Extreme corrosion protection
• Temperature resistant
• Overpaintable
• Spot weldable

Description:

• Multi-metal coating with aluminum-titanium-zinc cathodic long-term corrosion protection.
• Extremely resistant and very high-quality surface quality after full hardening.
• Very good adhesion to steel, aluminum, and copper, can be overpainted as a bonding bridge with commercially available 1-component and 2-component paints.
• Spot weldable.
• Resistance over 500 hours at only 15 μm in salt spray test.
• Use on car bodies, steel frames, steel construction, heating and ventilation construction and industry.

Application:

• Shake can for at least 3 minutes before use.
• The substrate must be clean, dry, free of grease and silicone.
• Remove rust beforehand with FERTAN.
• For optimum effect, apply a thin layer of MM 30 Spray in 1-2 spraying cycles, spray distance at least 15 – 25 cm.
• After use, spray over the head of the spray valve.
• Dust-dry after approx. 5 – 10 min; Touch-proof after approx. 1 hour; Complete hardening after 2-3 days at 20° C in each case.
• Temperature resistant up to 300° C.

Note: