Fertan HT Cavity Protection Wax, 500 ml

FERTAN cavity protection wax was developed for the preservation of car cavities based on wax.

Features:

• 500 millilitres spray can
• for the end protection of cavities, e. g. in car bodies
• The composition of the product allows easy processing without the product flowing out of the cavities.
• Due to the presence of resins, an optimal adhesion is achieved, even on vertical surfaces, etc.
• HT wax remains very soft and thus obtains the property of automatically closing small cracks in the coating even after years.
• for many years successful:
  • in the restoration of vintage cars
  • in the restoration of new motor vehicles
  • Coating of industrial structures

Processing:

• Shake well before use.
• FERTAN cavity protection Insert wax into the cavities by means of a cavity gun with 360° nozzle. Use the boreholes installed by the vehicle manufacturer or, if necessary, install new boreholes. Apply wax to the edges of the holes.
• FERTAN cavity protection Wax does not drip. Remove any splashes with test petrol.

• The optimum processing temperature and the temperature of the body should be min. 20°C.

• Apply wax 24 hours after rust removal by FERTAN rust converters.
• Please note the processing instructions for the rust converter.
  • After rust removal and before application of cavity protective wax, pre-treat the welds and sheet metal overlaps with a layer of PREWAX pre-treatment wax, a seam-penetrating protective wax with extreme creepability.
  • Then apply cavity protection wax in several thin layers, staggered by 12-48 hours to compensate for shrinkage cracks.

• At + 20° C: approx. 5 hours

• approx. 6 - 10 spray cans litres for a medium class passenger car

• cavity suction cup gun with 360° nozzle approx. 6 – 9 bar
• cavity pressure cup gun with 360° nozzle approx. 3 – 4. 5 bar