FLUID FILM LIQUID NAS 1 liter standard can

FLUID FILM NAS is mainly intended for protection of metal surfaces during internal temporary storage and for preservation during sea and road transport and for cavity sealing of motor vehicles.

• 1 liter standard can
• Viscosity: low (e.g. like ketchup)
• Creep ability: + + + +
• Protection time: approx. 6 years (in closed cavities)
• Processing: with commercially available compressed air systems after heating the material to approx. 25°C or with airless systems

Features

• Solvent-free and physiologically safe for application and as a protective film.
• Requires minimal surface treatment.
• Penetrates through rust, displaces water and forms an extremely resistant protection against corrosion by salts.
• Good adhesion to wet or dry surfaces.
• No evaporation, resinification or drying of the protective film.
• Can be easily removed if necessary.
• Can come into contact with water immediately after application.
• Processing after slight warming to approx. 25 °C, also possible with a standard pressure cup gun.
• Particularly suitable as a lubricant and penetrating oil.

Application:

• FLUID FILM NAS can be used as a rust remover and at the same time as a corrosion inhibitor.
• For economic reasons, it is recommended to remove loose contamination such as rust and old coating parts by washing.
• The surface may be damp, but must be freed from surface water.

• For temporary corrosion protection during transport by sea and for intermediate storage under roof.
  • By brush or roller by one-time application,
  • or by spraying with the help of compressed air systems
• For the preservation of cavities and inaccessible places
  • With a pressure cup gun and a cavity probe, after heating to approx. 25 °C while stirring

Effect:

• Extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter maintenance.
• Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
• Excellent salt water resistance.
• As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
• Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain or seawater, nor will it evaporate and gum up as most penetrating oils do.
• Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.