Fertan Ferpox Epoxyprimer 800 ml can

Features:

• FERPOX is a 1-K epoxy primer
• Lead and chromate free
• temperature resistant from -40° C to + 250° C
• overcoatable
• FERPOX is applied like normal adhesive ground or primer
• particularly good adhesion to:
  • Iron and steel
  • Pre-treated aluminium
  • hot-dip galvanized metal
• the ideal primer for all metals exposed to high stress or corrosion hazards:
  • particularly high strength
  • closed surface
• FERPOX can be injected (diluted) and coated
• Colour grey RAL 7012
• 800 ml container

Scope of application:

• Vehicle restoration:
• Subfloors
• Wheel arches
• Spray walls
• Frame and disc frames
• Battery holders
• etc.

Processing:

• FERPOX is applied like normal adhesive base or paint.
• Application is carried out by means of a brush, roller or spray gun.
• When applied with compressed air spray guns with max. Dilute 10% nitro dilution.
• When applying with a brush or roll, do not apply too high layer thicknesses, 1x thin layer is completely sufficient.
  • Compressed air processing:
    • Nozzle: 1. 5
    • Pressure: 2 – 4 bar
  • Dilution:
    • Nitro dilution (only)
  • Theoretical yield:
    • Different depending on the type of surface and processing.
  • Yield: Film thickness
    • Wet Dry Area
    • 77μm 50 μm 6. 9 m2/kg
    • 108 μm 70 μm 4. 8 m2/kg

• Delivery viscosity: approx. 150 sec. DIN 4 mm
• Density: approx. 1. 18 – 1. 24 kg/litre
• Overpaintable with 1-K and 2-K standard coatings: with 2-K max. 150 μm.
• Temperature resistance: -40° C to +250° C Permanent load – (colour change possible)

• At 20°C
  • Dust dry: approx. 30 min.
  • Grip-proof: approx. 60 min.
  • Overpaintable: approx. 6 hours.
  • Cured: approx. 24 hours.