Skip to main content Skip to search Skip to main navigation
  +49 241 559713   Mon.-Thurs. 9 am-5 pm, Fri. 9 am-3 pm        30 years experience        Certified shop        Fast shipping
Go to homepage

Ferpox Epoxyprimer, Spray Can, 400 ml

Product information "Ferpox Epoxyprimer, Spray Can, 400 ml "

Fertan Ferpox Epoxyprimer 400 ml Spray

 

Features:

  • FERPOX is a 1-K epoxy primer
  • Lead and chromate free
  • temperature resistant from -40° C to + 250° C
  • overcoatable
  • FERPOX is applied like normal adhesive ground or primer
  • particularly good adhesion to:
    • Iron and steel
    • Pre-treated aluminium
    • hot-dip galvanized metal
  • the ideal primer for all metals exposed to high stress or corrosion hazards:
    • particularly high strength
    • closed surface
  • FERPOX can be injected (diluted) and coated
  • Colour grey RAL 7012
  • 400 millilitre spray can
 

Scope of application:

  • Vehicle restoration:
  • Subfloors
  • Wheel arches
  • Spray walls
  • Frame and disc frames
  • Battery holders
  • etc.
 

Processing:

  • FERPOX is applied like normal adhesive base or paint.
  • Application is carried out by means of a brush, roller or spray gun.
  • When applied with compressed air spray guns with max. Dilute 10% nitro dilution.
  • When applying with a brush or roll, do not apply too high layer thicknesses, 1x thin layer is completely sufficient.
    • Compressed air processing:
      • Nozzle: 1. 5
      • Pressure: 2 – 4 bar
    • Dilution:
      • Nitro dilution (only)
    • Theoretical yield:
      • Different depending on the type of surface and processing.
    • Yield: Film thickness
      • Wet Dry Area
      • 77μm 50 μm 6. 9 m2/kg
      • 108 μm 70 μm 4. 8 m2/kg
Technical data:
 
  • Delivery viscosity: approx. 150 sec. DIN 4 mm
  • Density: approx. 1. 18 – 1. 24 kg/litre
  • Overpaintable with 1-K and 2-K standard coatings: with 2-K max. 150 μm.
  • Temperature resistance: -40° C to +250° C Permanent load – (colour change possible)

Dry season:
 
  • At 20°C
    • Dust dry: approx. 30 min.
    • Grip-proof: approx. 60 min.
    • Overpaintable: approx. 6 hours.
    • Cured: approx. 24 hours.
Filling Volume: 0.4

Product Safety and Downloads

Documents and datasheets

Product safety information

Manufacturer

Fertan GmbH
Saar-Lor-Lux-Straße 14
66115 Saarbrücken
Germany
Verkauf@FERTAN.de

Safety information
  • Flammable aerosol.
  • Causes serious eye irritation. May cause drowsiness and dizziness. Harmful to aquatic organisms with long lasting effects.
Skip product gallery

Zubehör

slide 1 to 5