Hazet 6122-1CT CAL Torque Wrench 1/2" 40-200Nm with DAkkS calibration certificate Features:   Release accuracy tolerance (in direction of actuation): ± 2 % of scale value High-precision measuring tools for highest demands Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant Safe storage in safe box with display window Safety lock at the handle Safe torque release: - palpable (close gap release) - audible ("click" sound) Knob for locking the set value User-friendly reversible ratchet Service-friendly (Do-It-Yourself repair kits for ratchets available) Integrated shift lever Easy and safe adjustment of the desired torque value by turning the handle Ergonomically shaped handle with collar reducing the risk of slipping-off and injury Accuracy - fine scale graduation With serial number and certificate Surface: hard chrome plated DIN EN ISO 6789:2003 (D), Square according to DIN 3120 A, ISO 1174-1 A Technical specifications: Square drive: 12,5 (1/2") l: 543 mm 40 - 200 Nm Graduation: 1  

Hazet 6123-1CT CAL Torque Wrench 1/2" 60-320 Nm with DAkkS calibration certification Features:   Release accuracy tolerance (in direction of actuation): ± 2 % of scale value High-precision measuring tools for highest demands Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant Safe storage in safe box with display window Safety lock at the handle Safe torque release: - palpable (close gap release) - audible ("click" sound) Knob for locking the set value User-friendly reversible ratchet Service-friendly (Do-It-Yourself repair kits for ratchets available) Integrated shift lever Easy and safe adjustment of the desired torque value by turning the handle Ergonomically shaped handle with collar reducing the risk of slipping-off and injury Accuracy - fine scale graduation With serial number and certificate Surface: hard chrome plated DIN EN ISO 6789:2003 (D), Square according to DIN 3120 A, ISO 1174-1 A Technical specification: Square drive: 12,5 (1/2") l: 659 mm 60 - 320 mm Graduation: 2 Nm

Hazet 6143-1CTCAL Torque wrench 6143-1CTCAL ? Nm min-max: 100???400 Nm ? Tolerance: 2% ? Square, solid 20 mm (3/4 inch) Features:Torque wrench including DAkkS calibration certificate2-component handle for improved feelSimplified locking for adjusting the torque valueViewing window for visual checking of the locking4 coloured coding rings (red, yellow, green, black) for markings in the case of personalisation or special workflowsAccuracy ± 2?% of the scale value (in direction of actuation for right-hand tighteningFor left-hand tightening, use our torque wrenches with insert tool)High-precision premium torque tools ? for the highest demandsHard chrome-plated steel tube - slim, but very sturdy and wear-resistantSecure storage in safe box with display windowSafety:Haptic (close-gap release)Audible (?click? sound)Visual (models with signal transmitter)User-friendly reversible ratchetService-friendly (do-it-yourself repair sets for ratchets available)Integrated shift leverEasy and safe adjustment of the desired torque value by turning the handleKnob for additionally locking the set valueErgonomically shaped handle with collar reduces the risk of slipping-off and injuryAccuracy ? fine scale graduation6121-1 CT ? 6123-1 CT: shift lever with idle function ? reduces risk of injury and malfunctionWith calibration certificate and serial numberSurface: hard chrome platedDIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1Made in GermanyOutput: Square, solid 20 mm (3/4 inch)Dimensions / length: 802 mmNm min-max: 100???400 NmTolerance: 2 %Scale Graduation (Nm): 2.5 NmActuating force min.-max. kg: 14.5???59.2 kgNumber of teeth: 32 (Opening angle 11.25°)Head Thickness a: 28.5 mmHead Width b: 64 mmNo more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required Technical features:HAZET Drehmoment-Schlüssel 6143-1CTCAL ? Nm min-max: 100???400 Nm ? Toleranz: 2% ? Vierkant 20 mm (3/4 Zoll)Weight: 5500 gHazet part number: 6143-1CTCALEAN: 4000896192922

Hazet 6144-1CT CAL Torque Wrench 3/4" 200-500 Nm with DAkkS calibration certification   Features: Release accuracy tolerance (in direction of actuation): ± 2 % of scale value High-precision measuring tools for highest demands Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant Safe storage in safe box with display window Safety lock at the handle Safe torque release: - palpable (close gap release) - audible (#201Eclick#201C sound) Knob for locking the set value User-friendly reversible ratchet Service-friendly (Do-It-Yourself repair kits for ratchets available) Integrated shift lever Easy and safe adjustment of the desired torque value by turning the handle Ergonomically shaped handle with collar reducing the risk of slipping-off and injury Accuracy - fine scale graduation With serial number and certificate Surface: hard chrome plated DIN EN ISO 6789:2003 (D), Square according to DIN 3120 A, ISO 1174-1 A 2-component handle for improved feel Simplified locking for adjusting the torque value Viewing window for visual checking of the locking With 3 additional coloured coding rings for markings with personalizations or special workflows Without signal transmitter   Technical specifications: Square drive: 20 (3/4") l: 1040 mm 200 - 500 Nm Graduation: 2,5 Nm

Hazet 6145-1CT CAL Torque Wrench 3/4" 300-800 Nm with DAkkS calibration certificate   Features: Release accuracy tolerance (in direction of actuation): ± 2 % of scale value High-precision measuring tools for highest demands Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant Safe storage in safe box with display window Safety lock at the handle Safe torque release: - palpable (close gap release) - audible ("click" sound) Knob for locking the set value User-friendly reversible ratchet Service-friendly (Do-It-Yourself repair kits for ratchets available) Integrated shift lever Easy and safe adjustment of the desired torque value by turning the handle Ergonomically shaped handle with collar reducing the risk of slipping-off and injury Accuracy - fine scale graduation With serial number and certificate Surface: hard chrome plated DIN EN ISO 6789:2003 (D), Square according to DIN 3120 A, ISO 1174-1 A 2-component handle for improved feel Simplified locking for adjusting the torque value Viewing window for visual checking of the locking With 3 additional coloured coding rings for markings with personalizations or special workflows Without signal transmitter   Technical specifications: Square drive: 20 (3/4") l: 1280 mm 300 - 800 Nm Graduation: 2,5 Nm

Hazet 6150-1CT CAL Torque Wrench 3/4" 400-1000 Nm with DAkkS calibration certificat   Features: For highest torque values Especially suited for industrial climbers Application on wind turbines, dockyards, heavy industry, etc. To be disassembled in two parts with release tool In carrier bag with carrying handle and shoulder strap Release accuracy tolerance ± 3% of scale value in direction of actuation Screw tightening also possible with ratchet shaft. For torque controlled screw tightening always use the complete wrench. 2-component handle for improved feel Simplified locking for adjusting the torque value Viewing window for visual checking of the locking With 3 additional coloured coding rings for markings with personalizations or special workflows Release torque only 590 N (60 kg) with 1000 Nm Length of ratchet shaft 903 mm, handle 930 mm   Technical specification: 1000 Nm Torque Wrench Weight only approx. 10 kg l: 1788 mm 400 - 1000 Nm Square drive: 20 (3/4") Graduation: 5 Nm

Hazet 6160-1CT CAL Torque Wrench 1" 600-1600 Nm with calibration certification   Features: For highest torque values Especially suited for industrial climbers Application on wind turbines, dockyards, heavy industry, etc. To be disassembled in two parts with release tool In carrier bag with carrying handle and shoulder strap Release accuracy tolerance ± 3% of scale value in direction of actuation Screw tightening also possible with ratchet shaft. For torque controlled screw tightening always use the complete wrench. Lenght of ratchet shaft 1205 mm, handle 1320 mm   Technical specifications: 1600 Nm Torque Wrench Weight only approx. 14 kg Square drive: 25 (1") l: 2455 mm 600 - 1600 Nm Graduation: 5 Nm

Hazet 6170-1CT Torque Wrench 1" 800-2000 Nm   Features: Square drive: 25 mm (1") 800-2000 Nm For highest torque values Especially suited for industrial climbers Application on wind turbines, dockyards, heavy industry, etc. To be disassembled in three parts with release tool In carrier bag with carrying handle and shoulder strap Release accuracy tolerance ± 4% of scale value in direction of actuation Screw tightening also possible with ratchet shaft. For torque controlled screw tightening always use the complete wrench. Mit Seriennummer und Zertifikat Made In Germany   Technical specifications: Weight only approx. 18 kg Actuating force only 685 N (70 kg) at 2000 Nm Ratched shaft: 1317 mm Handle: 1203 mm Graduation: 6 Nm Tolerance : 4 Lenght: 3034 mm Verlängerungsstück: 645 mm

Hazet 6280-1CT CAL Torque Wrench 2-10 Nm with DAkkS calibration certificate   Features: With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation): ± 2% of scale value DIN EN ISO 6789:2003 (D)   Technical specifications: Drive: 9 x 12 l: 180 mm 2 - 10 Nm Graduation: 0,2 Nm

Hazet 6281-2CT Torque Wrench 5-13 Nm For the regulation of the control valve at the gas tank of VW up! and Caddy model years 2012 → (adjustment is necessary after installation or removal)   Features: Extra short construction for areas with restricted access With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation) ± 4% of scale value Surface: hard chrome plated DIN EN ISO 6789-2:2017 Made in Germany Total length: 125.4 mm Output: Insert square 9 x 12 mm Net weight: 0.23 kg No turning back: continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have been able to demonstrate that turning them back to the smallest scale value is no longer required   Technical Data: Actuating force min.-max. kg : 4.4 - 11.8 Effective torque wrench length I1 mm : 99 mm Effective torque wrench length max. I1 mm : 112.5 mm Effective torque wrench length min. I1 mm : 116.5 mm Head thickness a : 17 mm Head width b : 22 mm Length : 125.4 mm Net weight : 0.234 kg Nm min-max : 5 - 13 Output : Insert square 9 x 12 mm Scale graduation (Nm) : 0.2 Nm Standard : DIN EN ISO 6789-2:2017 Surface : hard chrome plated Tightening torque max. : 13 Nm Tolerance : 4 % Torque min Nm : 5 Nm Total length : 125.4

Hazet 6282-1CTCAL Torque wrench 6282-1CTCAL ? Nm min-max: 4???40 Nm ? Tolerance: 2% ? Insert square 9 x 12 mm Features:Torque wrench including DAkkS calibration certificatePlug-and-socket connection to hold insert toolsAccuracy ± 2?% of the scale value (in direction of actuation)Can be used for right-hand and left-hand threads by turning the insert toolSafety:Haptic (close-gap release)Audible (?click? sound)With calibration certificate and serial numberEspecially slim design thanks to spring-loaded puller sleeve for locking the setting valuesEasy and safe adjustment of the desired torque value by turning the handleDIN EN ISO 6789-2:2017Made in GermanyOutput: Insert square 9 x 12 mmDimensions / length: 240 mmNm min-max: 4???40 NmTolerance: 2 %Scale Graduation (Nm): 0.4 NmEffective torque wrench length min.-max. I1 mm: 219.40???205.90 NmActuating force min.-max. kg: 1.9???19.8 kgInside micrometre of the adjusting tool l2: 19.5 mmHead Thickness a: 17 mmHead Width b: 22 mmNot according to DIN, as the maximum torque value of the square specified in the standard 6789-1:2017 is exceededNo more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required Technical features:HAZET Drehmoment-Schlüssel 6282-1CTCAL ? Nm min-max: 4???40 Nm ? Toleranz: 2% ? Einsteck-Vierkant 9 x 12 mmWeight: 530 gHazet part number: 6282-1CTCALEAN: 4000896193080

Hazet 6290-1CT CAL Torque Wrench 5-60 Nm 9x12 mm with DAkkS calibration certificate   Features: Torque wrench including DAkkS calibration certificate With plug-and-socket connection to accomodate insert tools Accuracy ± 2% of scale value (in direction of actuation) In safe box DIN EN ISO 6789-2:2017 Made in Germany Total length: 306 mm Output: Insert square 9 x 12 mm Net weight: 0.46 kg No turning back: continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have been able to demonstrate that turning them back to the smallest scale value is no longer required   Technical data: Actuating force min.-max. kg : 1.8 - 23.1 Effective torque wrench length I1 mm : 252 mm Effective torque wrench length max. I1 mm : 265.02 mm Effective torque wrench length min. I1 mm : 281.52 mm Head thickness a : 17 mm Head width b : 22 mm Length : 306 mm Net weight : 0.455 kg Nm min-max : 5 - 60 Output : Insert square 9 x 12 mm Scale graduation (Nm) : 0.5 Nm Signal transmitter : yes Standard : DIN EN ISO 6789-2:2017 Tightening torque max. : 60 Nm Tolerance : 2 % Torque min Nm : 5 Nm Total length : 306

Hazet 6291-2CT CAL Torque Wrench 20-120 Nm with DAkkS calibration certificate   Features: With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation): ± 2% of scale value In safe box DIN EN ISO 6789:2003 (D)   Technical specifications: Drive: 9 x 12 20 - 120 Nm length: 388 mm Graduation: 1 Nm

Hazet 6292-1CTCAL Torque Wrench 40-200 Nm with DAkkS calibration certificate   Features: With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation): ± 2% of scale value In safe box DIN EN ISO 6789:2003 (D)   Technical specifications: Drive: 14 x 18 40 - 200 Nm length: 510 mm Graduation: 1 Nm

Hazet 6293-1CT CAL Torque Wrench 60-320 Nm with DAkkS calibration certificate   Features: With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation): ± 2% of scale value In safe box DIN EN ISO 6789:2003 (D)   Technical specifications: Drive: 14 x 18 60 - 320 Nm length: 620 mm Graduation: 2 Nm

Hazet 6294-1CT CAL Torque Wrench 100-400 Nm with DAkkS calibration certificate   Features: With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation): ± 2% of scale value In safe box DIN EN ISO 6789:2003 (D) Without signal transmitter   Technical specifications: Drive: 14 x 18 length: 715 mm 100 - 400 Nm Grafuation: 2,5 Nm

Hazet 6295-1CT CAL Torque Wrench 200-500 Nm with DAkkS calibration certificate   Features: With plug-and-socket connection to accomodate insert tools Release accuracy tolerance (in direction of actuation): ± 2% of scale value In safe box DIN EN ISO 6789:2003 (D) Without signal transmitter   Technical specifications: Drive: 14 x 18 length: 955 mm 200 - 500 Nm Graduation: 2,5 Nm

Hazet 6391-10 Torque wrench, 1-10 Nm / +-6% Tolerance, Insert square 9x12   Features: With lockable torque setting Especially suitable for application in industrial series production Adjusting the desired torque value with adjustment wrench 6399 in conjunction with HAZET torque tester 7901 E, 7902 E, 7903 E or any other suitable device. All torque wrenches of this line (HAZET 6391-6392) are without scale and without signal transmitter DIN EN ISO 6789:2003 (D) Made in Germany   Technical features: Standard: DIN EN ISO 6789:2003 (D) Length (mm): 125 mm Output: Insert square 9 x 12 mm Torque min. (Nm): 1 Nm Torque max. (Nm): 10 Nm Tolerance (%): 6 % Head width b (mm): 22 mm Head thickness a (mm): 17 mm

Hazet 7250-2stac Torque wrench with built-in angle gauge, electronic · SmartTAC SYSTEM · 200-1000 Nm 3/4" SmartTAC SYSTEM 7000 sTAC For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Integrated reversible ratchet 20 mm = 3/4" HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable   Functions: 7000-2 sTAC Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 1772 mm Output: Square, solid 20 mm (3/4 inch) Net weight: 8.4 kg   Technical data: Actuating force min.-max. kg : 12.2 - 60.8 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable lbf min-max : 150 - 750 Length : 1772 mm Net weight : 8.4 kg Nm min-max : 200 - 1000 Number of batteries : 1 Number of teeth : 32 Zähne Opening angle : 11.25 ° Output : Square, solid 20 mm = 3/4″ Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 1000 Nm Tolerance : 1 % Torque max lbf.ft : 750 lbf.ft Torque min lbf.ft : 150 lbf.ft Torque min Nm : 200 Nm Total length : 1772 mm

Hazet 7280-2sTAC Torque wrench w. built-in angle gauge electronic · SmartTAC SYSTEM 7000 sTAC · 1-10Nm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)    Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6401-1 square 6.3 = 1/4" Length with / without insert tool: 290.5 mm / 260 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable    Functions: 7000-2 sTAC Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 260 mm Output: Insert square 9 x 12 mm, Square, solid 6.3 mm (1/4 inch) Net weight: 0.48 kg    Technical data: Actuating force min.-max. kg : 0.5 - 4.6 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 203 mm lbf min-max : 0.75 - 7.5 Length : 260 mm Net weight : 0.48 kg Nm min-max : 1 - 10 Number of batteries : 1 Number of teeth : 20 Zähne Opening angle : 18 ° Output : Insert square 9 x 12 mm, square 6,3 = 1/4″ Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 10 Nm Tolerance : 2 % Torque max lbf.ft : 7.5 lbf.ft Torque min lbf.ft : 0.75 lbf.ft Torque min Nm : 1 Nm Total length : 260 mm

Hazet 7281-2STAC Torque wrench with built-in angle gauge, electronic 2,5-25 Nm 9x12 mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6401-1, 6.3 = 1/4" Length with / without insert tool: 290.5 mm / 260 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable Functions: 7000-2 sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 260 mm Output: Insert square 9 x 12 mm, Square, solid 6.3 mm (1/4 inch) Net weight: 0.48 kg   Technical data: Actuating force min.-max. kg : 1.1 - 11.4 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 203 mm lbf min-max : 1.85 - 18.5 Length : 260 mm Net weight : 0.48 kg Nm min-max : 2.5 - 25 Number of batteries : 1 Number of teeth : 20 Zähne Opening angle : 18 ° Output : Insert square 9 x 12 mm, 6,3 = 1/4" Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 25 Nm Tolerance : 2 % Torque max lbf.ft : 18.5 lbf.ft Torque min lbf.ft : 1.85 lbf.ft Torque min Nm : 2.5 Nm Total length : 260

Hazet 7290-2STAC Torque wrench with built-in angle gauge, electronic 5-60 Nm, 3/8" 9x12 mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6402-1, 10 mm = 3/8" Length with / without insert tool: 347 mm / 302 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable Functions 7000-2 sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 302 mm Output: Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Net weight: 0.64 kg   Technical data: Actuating force min.-max. kg : 1.8 - 22.2 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 248 mm lbf min-max : 3.5 - 44 Length : 302 mm Net weight : 0.64 kg Nm min-max : 5 - 60 Number of batteries : 1 Number of teeth : 30 Zähne Opening angle : 12 ° Output : Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 60 Nm Tolerance : 1 % Torque max lbf.ft : 44 lbf.ft Torque min lbf.ft : 3.5 lbf.ft Torque min Nm : 5 Nm Total length : 302 mm

Hazet 7291-2STAC Torque wrench with built-in angle gauge, electronic SmartTac 10-100 Nm 3/8" 9x12mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6402-1, 10 = 3/8" Length with / without insert tool: 428 mm / 383 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable   Functions 7000-2 sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 383 mm Output: Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Net weight: 0.72 kg   Technical data: Actuating force min.-max. kg : 2.9 - 28.7 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 327 mm lbf min-max : 7.5 - 75 Length : 383 mm Net weight : 0.72 kg Nm min-max : 10 - 100 Number of batteries : 1 Number of teeth : 30 Zähne Opening angle : 12 ° Output : Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 100 Nm Tolerance : 1 % Torque max lbf.ft : 75 lbf.ft Torque min lbf.ft : 7.5 lbf.ft Torque min Nm : 10 Nm Total length : 383 mm

Hazet 7292-2sTAC Torque wrench with built-in angle gauge, electronic 20-200 Nm, 12,5 = 1/2" 14x18 mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6404-1, 12.5 = 1/2" Length with / without insert tool: 578.5 mm / 520 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable Functions 7000-2sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 520 mm Output: Insert square 14 x 18 mm, Square, solid 12.5 mm (1/2 inch) Net weight: 1.1 kg   Technical data: Actuating force min.-max. kg : 4.1 - 40.7 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 464 mm lbf min-max : 15 - 150 Length : 520 mm Net weight : 1.1 kg Nm min-max : 20 - 200 Number of batteries : 1 Number of teeth : 32 Opening angle : 11.25 ° Output : Insert square 14 x 18 mm, 1/2" Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 200 Nm Tolerance : 1 % Torque max lbf.ft : 150 lbf.ft Torque min lbf.ft : 15 lbf.ft Torque min Nm : 20 Nm Total length : 520 mm