Kukko - Tools
Kukko 128-4 Ball Joint Extractor 40 MmMe rcedes Type
Regular price:
€123.95
Kukko joint extractor
Description
Bell-shaped
Direct pressure on the ball stud
Ideal when a lot of space is available
Damage-free working
Made of high-strength, alloyed heat-treated steel, galvanised
Rolled thread is specially coated
A torque spanner is recommended for the drive
Application
For pressing out the ball studs when removing ball joints and tie rod ends on tie rods for all vehicle types
Benefit
Almost all components available as spare parts, time-saving ordering thanks to numbering
Mode of operation
Push the puller bracket between the ball joint and actuate the pressure spindle.
Safety instructions
Do not use electric or pneumatic power or impact wrenches to operate extraction tools
Safety cover required
Wear safety goggles
Kukko 128-5 Ball Joint Extractor 46 Mm Mercedes Ty pe
Regular price:
€180.95
Kukko joint extractor
Description
Bell-shaped
Direct pressure on the ball stud
Ideal when a lot of space is available
Damage-free working
Made of high-strength, alloyed heat-treated steel, galvanised
Rolled thread is specially coated
A torque spanner is recommended for the drive
Application
For pressing out the ball studs when removing ball joints and tie rod ends on tie rods for all vehicle types
Benefit
Almost all components available as spare parts, time-saving ordering thanks to numbering
Mode of operation
Push the puller bracket between the ball joint and actuate the pressure spindle.
Safety instructions
Do not use electric or pneumatic power or impact wrenches to operate extraction tools
Safety cover required
Wear safety goggles
Kukko 128-F-SW Univ.2-Arm Puller For Wiper-Arms S pread 60Mm~ Depth 50Mm
Regular price:
€85.95
Kukko Universal whiper-arm puller DescriptionMechanical pressure screw.Milled thread treated with special coating. UseFor pulling tight-fitting, rusted and deep-set windscreen whiper arms. AdvantageSuitable for front and rear wipers with the washing fluid hose passing through the hub.Almost all components available as replacement parts, time-saving order process thanks to numbering system. How it worksAfter removing the detachable cap, unscrew the stop nut to a point just before reaching the end, then attach and fix the gripper behind the wiper arm.The gripper´s counter hold is provided by the spanner flat (SW 15 mm).Remove the wiper arm by tightening pressure spindle.The supplied brass pressure piece is used for wiper arms with integrated windscreen washer jets
Kukko 128-FSW-50-P Univ.2-Arm Puller For Wiper-Ar ms Spread 60Mm~ Depth 50Mm
Regular price:
€42.95
Kukko Pair of jaws with fixing material
Kukko 128-T-4 Ball Joint Extractor 40 Mm Mercedes Type
Regular price:
€490.95
Kukko Universal KUKKO system for ball joint repairs DescriptionBell-shaped designDirect pressure on the ball pinIdeal if enough space is availableWorking without damageThe tool was specifically developed for uses on the VW T4.Two additional insertion plates of 40 mm and 46 mm are included.For installation and removal of ball joints.A torque wrench is recommended for the drive UseFor assembly and disassembly of ball joints on the T4. AdvantageSaves a lot of time when replacing suspension joints. How it worksUse in disassembly1. Ensure free access to the ball joint.2. Remove the retaining ring.3. Insert the appropriate pressure pad for the ball joint, either (12803617) or (12804017).4. Position the puller body on the transverse control arm. Possibly adjust the size with insertion plates.5. Push the ball joint out by tightening the spindle.Use in assembly1. Before assembly, clean the mounting on the transverse control arm.2. Insert the pressure pad (12805217) into the spindle.3. Insert the appropriate insertion plate (12851011 or 12855011) into the puller body.4. Position the new ball joint on the transverse control arm.5. Position the body and pull in the ball joint by tightening the spindle.Warning! Don‘t forget the new retaining ring! Safety informationDo not use any electrical or pneumatic servo screwdrivers or hammer drills.Protective blanket required.Protective goggles required.
Kukko 129-0 Ball Joint Extractor 20 Mm Le ver Action Type
Regular price:
€131.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-0-25 Ball Joint Extractor 25 Mm For Smal ler Vag Suspensions
Regular price:
€131.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-0-29 Ball Joint Extractor 29,5 Mm F.Medi um Sized Vag Suspensions
Regular price:
€131.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-0-DC-1 Ball Joint Extractor 20 Mm Merce des C (203 589 00 33 00)
Regular price:
€187.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-0-DC-2 Ball Joint Extractor 20 Mm For S mart (454 589 00 33 00)
Regular price:
€146.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-1 Ball Joint Extractor 18-22 Mm Lever Ac tion Type, 2 Stages
Regular price:
€102.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-1-B-1 Ball Joint Extractor 31 Mm Bmw (N o. 3 12 300)
Regular price:
€128.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-2 Ball Joint Extract.16-22-32 Mm Le ver Action Type
Regular price:
€127.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-25 Univ.Ball Joint Extract. 19 Mm Lever Action Type
Regular price:
€131.95
Kukko Universal adjustable ball joints extractors DescriptionMade from sturdy, alloyed, hardened and tampered steel, galvanized.Milled thread treated with special coating. UseFor extracting ball pins when dismantling ball joints, track-rod ends on track rods, in passenger vehicles. AdvantageClamping width can be increased with simple 3-level conversion.Almost all components available as replacement parts, time-saving order process thanks to numbering system. How it worksSlide the puller clamp between the ball joint and operate the pressure spindle. Safety informationDo not use any electrical or pneumatic servo screwdrivers or hammer drills.Protective blanket required.Protective goggles required.
Kukko 129-3 Ball Joint Extractor 31 Mm Lever Acti on Type
Regular price:
€171.95
Kukko Adjustable ball joint extractors lever type, for medium-sized trucks and busses
Kukko 129-3-A Ball Joint Extractor 30 Mm For Alu-Chassis
Regular price:
€156.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-3-A-32 Ball Joint Extractor 32 Mm For Al u-Chassis A 8 (2003)
Regular price:
€159.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-3-A-34 Ball Joint Extractor 34 Mm For A lu-Chassis A 8 (2003)
Regular price:
€156.95
Kukko Adjustable ball joint extractors lever type
Kukko 129-3-H Ball Joint Ectractor 34 Mm With Hydraulic Ram 10 Tons
Regular price:
€352.95
Kukko Ball joints extractor with short hydraulic spindle DescriptionGrease hydraulics.Simple adjustment of clamping depths thanks to spring mechanism.Hydraulic and mechanical pressure screw.Milled thread treated with special coating.Made from sturdy, alloyed, hardened and tampered steel, galvanized. UseFor extracting particularly tight ball pins when dismantling ball joints, track-rod ends on track rods, for medium-sized heavy goods vehicles, buses and construction vehicles. AdvantageLittle force required for a strong pulling performance.Piston functions on the axis and does not turn in the hydraulic spindle.Spindle head band prevents the wrench from slipping off.Almost all components available as replacement parts, time-saving order process thanks to numbering system. How it worksScrew the upper spindle together before use.Insert the pressure piece onto the pressure bolt.Screw the hydraulic spindle into the body.Position the puller clamp by pressing on the spring, slide it between the ball joint and operate the pressure spindle. Safety informationObserve max. torque.Do not use any electrical or pneumatic servo screwdrivers or hammer drills.Protective blanket required.Protective goggles required.
