Products from Proxxon
No results were found for the filter!
Proxxon 28690 MICRO screwdriver MIS 1
PROXXON 28690 MICRO screwdriver MIS 1 Features: With pre-selectable torques of 0.35 - 2.0Nm Small, light and easy to handle An ideally positioned rocker switch provides on/off/reverse A RÖHM chuck facilitates acceptance of all bit shanks...
€74.95 *
Proxxon 28746 Spiral blade with plain ends...
PROXXON 28747 Spiral blade with plain ends (without pins), 12 pieces Features: These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces) A 1.5mm hole is required Ideal for...
Content 12 Stück (€0.38 * / 1 Stück)
€4.50 *
Proxxon 28752 Tungsten carbide millers, 3 pieces
PROXXON 28752 Tungsten carbide millers, 3 pieces Features: Shape and size: see the picture above Made of wear-resistant highly compressed fine-granular tungsten Used for vibration-free milling of high accuracy dimensions It is advisable...
€9.15 *
Proxxon 29040 Edge cutter with pin 5.0mm
PROXXON 29040 HSS Edge Cutter with pin, 5,0 mm Features: HSS Edge Cutter with pin for MP 400 For cutting hard wood and fibreboard Clean relief grinding for good work results and surface quality High stability For manufacturing slots,...
€3.50 *
Proxxon 29060 Rasp cutter with wolfram carbide...
PROXXON 29060 Rasp cutter with wolfram carbide burrs (shape: ball nose cylinder), 7.5 x 12mm Features: Unrivalled for sculpting, cleaning and smoothing wood and fibre glass Extremely sharp and easy to handle: The material can be removed...
€16.95 *
Proxxon 28620 MICROMOT Flexishaft 110/P
PROXXON 28620 MICROMOT Flexishaft 110/P With steel collets Features: Dual ball-bearinged milled steel shaft with tool holder for MICROMOT steel collets Ball-bearinged shaft end on machine Highly flexible core (does not run hot when...
€27.95 *
Proxxon 28720 Wolfram vanadium steel milling...
PROXXON 28720 Wolfram vanadium steel milling bits (5,0 mm), 3 pieces Features: 3 parts: forms: see picture above Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise...
€7.95 *
Proxxon 28724 Wolfram vanadium steel milling...
PROXXON 28724 Wolfram vanadium steel milling bits (shape: flame), 6 mm, 2 pieces Features: Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise flutes and optimal...
Content 2 Stück (€3.95 * / 1 Stück)
€7.90 *
Proxxon 28726 Wolfram vanadium steel milling...
PROXXON 28726 Wolfram vanadium steel milling bits (shape: actuator), 8 mm, 2 pieces Features: Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise flutes and optimal...
Content 2 Stück (€4.63 * / 1 Stück)
€9.25 *
Proxxon 28727 Wolfram vanadium steel milling...
PROXXON 28727 Wolfram vanadium steel milling bits (shape: disc), 10 mm, 2 pieces Features: Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise flutes and optimal...
Content 2 Stück (€5.63 * / 1 Stück)
€11.25 *
Proxxon 28741 Standard scroll saw blades with...
PROXXON 28741 Standard scroll saw blades with pin ends, 10 teeth, 12 pieces Features: For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces Coarse-toothed 10 teeth per 25mm 127 x 2,61...
Content 12 Stück (€0.49 * / 1 Stück)
€5.90 *
Proxxon 28772 High quality corundum grinding...
PROXXON 28772 High quality corundum grinding bits (shape: spherical), 5 mm, 5 pieces Features: Bits and sets of fine, high quality materials of consistent hardness Various shapes for the widest possible range of applications For grinding...
Content 5 Stück (€0.51 * / 1 Stück)
€2.55 *
Proxxon 28802 Felt polishers (shape: actuator)...
PROXXON 28802 Felt polishers (shape: actuator) (7 x 15 mm), 2 pieces Features: For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste Also for final polishing in mould and...
Content 2 Stück (€1.23 * / 1 Stück)
€2.45 *
Proxxon 28809 Aluminium oxide cutting discs...
PROXXON 28809 Aluminium oxide cutting discs with reinforcement (22 mm), 50 pieces + 1 Arbor Features: The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm Nearly unbreakable, making them usable to remove stock Will cut...
Content 50 Stück (€0.29 * / 1 Stück)
€14.50 *
Proxxon 28820 Corundum cutting discs (38 mm), 5...
PROXXON 28820 Corundum cutting discs (38 mm), 5 pieces + 1 Arbor Features: Discs made of a special compound of diameter 22 or 38 x 0.7mm Used to part alloys and metals, stainless steels and nonferrous metals Can also be used for cutting...
Content 5 Stück (€0.55 * / 1 Stück)
€2.75 *
Proxxon 28842 Diamond cutting discs (38 mm) +...
PROXXON 28842 Diamond cutting discs (38 mm) + Arbor Features: Only 0.6mm thick For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and nonferrous metals Shaft of Ø 2.35mm
€7.75 *
Proxxon 23832 Open-end spanners, 8 x 9 mm
PROXXON 23832 Open-end spanners, 8 x 9 mm SlimLine spanners. Hands-on tools! Features: Optimal surface protection by means of double nickel-plating and single chrome-plating. With easy to hold, smooth finish With durable laser inscribed...
€3.55 *
Proxxon 23840 Open-end spanners, 14 x 15 mm
PROXXON 23840 Open-end spanners, 14 x 15 mm SlimLine spanners. Hands-on tools! Features: Optimal surface protection by means of double nickel-plating and single chrome-plating. With easy to hold, smooth finish With durable laser...
€5.25 *
Proxxon 23850 Open-end spanners, 20 x 22 mm
PROXXON 23850 Open-end spanners, 20 x 22 mm SlimLine spanners. Hands-on tools! Features: Optimal surface protection by means of double nickel-plating and single chrome-plating. With easy to hold, smooth finish With durable laser...
€7.50 *
Proxxon 23082 ROTARY ratchet 1/4" (6,3 mm)
PROXXON 23082 ROTARY ratchet 1/4" (6,3 mm) Features: With extra offset action! Rotating the grip enables the stop to be pre-stressed on one side Just a few millimetres are sufficient for loosening and tightening Screwing in "idle" occurs...
€30.95 *
Proxxon 23130 MicroSpeeder with reversing l.,8 mm
PROXXON 23130 MicroSpeeder with reversing lever, 8 mm No swopping over: a real time saver! Features: MicroSpeeder with lever for direction change and 15° ring offset Extra long design The 15º ring offset might make the turning over of...
€9.95 *
Proxxon 23143 MicroSpeeder with reversing l.,21 mm
PROXXON 23143 MicroSpeeder with reversing lever, 21 mm No swopping over: a real time saver! Features: MicroSpeeder with lever for direction change and 15° ring offset Extra long design The 15º ring offset might make the turning over of...
€21.50 *
Proxxon 22020 FLEX-DOT - Slotted screwdriver 10,0
PROXXON 22020 FLEX-DOT - Slotted screwdriver (10.0 x 1.6 x 200) FLEX-DOT screwdrivers. The allrounders for workshop and assembly! Features: Ergonomic design for proper handling: Rounded two-component handle and flexible "FLEX-DOT" nubs...
€8.75 *
Proxxon 22072 FLEX-DOT - POZIDRIV Phillips s.
PROXXON 22072 FLEX-DOT - POZIDRIV Phillips screwdrivers, PZ 1 x 80 FLEX-DOT screwdrivers. The allrounders for workshop and assembly! Features: Ergonomic design for proper handling: Rounded two-component handle and flexible "FLEX-DOT"...
€4.25 *
Proxxon 22212 HEX (ball head) screwdriver, HEX 5
PROXXON 22212 FLEX-DOT - HEX (ball head) screwdriver, HEX 5 x 100 Professional screwdrivers for industrial and commercial use! Features: Ergonomic design for proper handling: Rounded two-component handle and flexible "FLEX-DOT" nubs for...
€5.15 *
Proxxon 22236 TTX Tamper TORX screwdrivers, TTX 20
PROXXON 22236 FLEX-DOT - TTX Tamper TORX screwdrivers, TTX 20 x 100 Professional screwdrivers for industrial and commercial use! Features: Ergonomic design for proper handling: Rounded two-component handle and flexible "FLEX-DOT" nubs...
€4.75 *
Proxxon 22260 HEX nut screwdrivers, HEX 5.5
PROXXON 22260 FLEX-DOT - HEX nut screwdrivers, HEX 5.5 x 125 Professional screwdrivers for industrial and commercial use! Features: Ergonomic design for proper handling: Rounded two-component handle and flexible "FLEX-DOT" nubs for...
€6.50 *
Proxxon 22274 HEX nut screwdrivers, HEX 12
PROXXON 22274 FLEX-DOT - HEX nut screwdrivers, HEX 12 x 125 Professional screwdrivers for industrial and commercial use! Features: Ergonomic design for proper handling: Rounded two-component handle and flexible "FLEX-DOT" nubs for...
€7.90 *
Proxxon 23573 3/8" allen socket bit, HX 11 mm
Proxxon 23573 allen socket bit 3/8", HX 11 mm Features: 3/8" HX 11 mm Lenght: 50 mm
€4.60 *
Proxxon 28900 HSS cutting blade for OZI/E, 160...
PROXXON 28900 HSS cutting blade for OZI/E, 160 teeth Features: Oscillates, making it ideal for cutting metal, wood, PC cards, plastics, plaster of Paris and many other materials The segment cut facilitates exact cutting right into...
€13.90 *
Proxxon 28911 Schmuckbearbeitungs-Set 7-teilig
PROXXON 28911 Werkzeugsatz für Schmuckbearbeitung, 7-tlg. Lieferumfang: je 1 Kugelfräser Ø 3,0 - 4,0 und 5,0 mm mit Loch (zum Ausfräsen von Fassungen für Perlen etc.) 1 Doppelkegelfräser zum Einfräsen des Sitzes von Steinen mit Ø 1,4 mm...
€23.51 *
Proxxon 28924 Grinding bands made from...
PROXXON 28924 Grinding bands made from high-quality corundum (aluminium oxide), 150 grit, 5 pieces Features: Mounted on a high-performance support For the grinding of metal, non-ferrous metals, wood and plastics 40 x 265 mm
Content 5 Stück (€1.28 * / 1 Stück)
€6.40 *
Proxxon 28952 Steel wheel (22 mm), 5 pieces
PROXXON 28952 Steel wheel (22 mm), 5 pieces + 1 Arbor Features: High quality components for best operation For cleaning, removing rust, sanding, frosting, roughening, rounding-off, etc. of metal, cast iron, plastic, stone and wood Shaft...
Content 5 Stück (€1.58 * / 1 Stück)
€7.90 *
Proxxon 28968 Self-adhesive silicone film for...
PROXXON 28968 Self-adhesive silicone film for easy sanding disc removal (ø 250 mm) Features: For retrofitting older disc sanders TG 250/E (production before 2007 with serial no. up to 14190) The film needs to be placed on the aluminium...
€8.35 *
Proxxon 28978 Sanding bands (13 x 14 mm), grit:...
PROXXON 28978 Sanding bands (13 x 14 mm), grit: 120, 10 pieces Features: Sanding bands are made of standard corundum The sanding compounds have a tough consistency and different grits for preliminary and refinishing work Extreme...
Content 10 Stück (€0.79 * / 1 Stück)
€7.90 *
Proxxon 28979 Sanding bands for replacement (13...
PROXXON 28979 Sanding bands for replacement (13 x 14 mm), grit: 120, 10 pieces Features: Sanding bands are made of standard corundum The sanding compounds have a tough consistency and different grits for preliminary and refinishing work...
Content 10 Stück (€0.59 * / 1 Stück)
€5.90 *
Proxxon 29038 Rebating cutter 6.4mm
PROXXON 29038 HSS Rebating Cutter, 6,4 mm Features: HSS rebating cutter for MP 400 For cutting hard wood and fibreboard Clean relief grinding for good work results and surface quality High stability For manufacturing slots, sections,...
€4.20 *
Proxxon 29062 Rasp cutter with wolfram carbide...
PROXXON 29062 Rasp cutter with wolfram carbide burrs (shape: cone), 8 x 12mm Features: Unrivalled for sculpting, cleaning and smoothing wood and fibre glass Extremely sharp and easy to handle: The material can be removed with control and...
€17.95 *
Proxxon 28710 Wolfram vanadium steel milling...
PROXXON 28710 Wolfram vanadium steel milling bits, 5 pieces Features: 5 parts: forms: see picture above Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise flutes and...
€5.90 *
Proxxon 28732 Saw blade, tungsten carbide...
PROXXON 28732 Saw blade, tungsten carbide tipped, 36 teeth Features: Ø 80 x 1.6 x 10mm 36 teeth Used for balsa, plywood, soft and hard woods, POLYCARBONATE, plastics,non-ferrous metals, glass-fiber reinforced circuit boards
€17.95 *
Proxxon 28757 Rasp cutter 3,2 mm
PROXXON 28757 Rasp cutter 3,2 mm Features: For cutting and milling tiles, stoneware, wood and plastics Spare cutter for FEX Shaft Ø 3,2 mm Length: 50 mm Cutter dimensions: 3,2 x 22 mm
€8.50 *
Proxxon 28774 High quality corundum grinding...
PROXXON 28774 High quality corundum grinding bits (shape: actuator), 2,5 mm, 5 pieces Features: Bits and sets of fine, high quality materials of consistent hardness Various shapes for the widest possible range of applications For...
Content 5 Stück (€0.51 * / 1 Stück)
€2.55 *
Proxxon 28876 HSS twist drill set with centring p.
PROXXON 28876 HSS twist drill set with centring pin (1,5 bis 4,0 mm) Features: For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets Titanium coating reduces friction and increases service...
€13.90 *
Proxxon 28292 Polishing Paste (30 g)
PROXXON 28292 Polishing Paste (30 g) Features: Absolutely essential for polishing metal and plastic
Content 0.03 Kilogramm (€136.67 * / 1 Kilogramm)
€4.10 *
Proxxon 28492 Long neck angle milling/drilling...
PROXXON 28492 Long neck milling/drilling unit LWB/E Features: With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head Also suitable for right-angled separation of rods With a special balanced,...
€94.95 *
Proxxon 29026 slot cutter ø 50mm
PROXXON 29026 HSS slot cutter ø 4,8 mm Features: HSS slot cutter for MP 400 For cutting hard wood and fibreboard Clean relief grinding for good work results and surface quality High stability For manufacturing slots, sections, radii and...
€4.20 *
Proxxon 28723 Wolfram vanadium steel milling...
PROXXON Wolfram vanadium steel milling bits (shape: cone ), 4x6 mm, 2 pieces Features: Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise flutes and optimal...
Content 2 Stück (€4.63 * / 1 Stück)
€9.25 *
Proxxon 28725 Wolfram vanadium steel milling...
PROXXON 28725 Wolfram vanadium steel milling bits (shape: spherical), 6 mm, 2 pieces Features: Selected wolfram vanadium steel Purpose-made stable construction with head and shaft out of a single blank The precise flutes and optimal...
Content 2 Stück (€3.80 * / 1 Stück)
€7.60 *
Viewed