Hazet 7292-2sTAC Torque wrench with built-in angle gauge, electronic 20-200 Nm, 12,5 = 1/2" 14x18 mm

Features:

• Smart technology - Ready for Industry 4.0
• Delivery includes insert reversible ratchet 6404-1, 12.5 = 1/2"
• Length with / without insert tool: 578.5 mm / 520 mm
• HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app
• Unique ergonomic, user-oriented HAZET design of entire tool for professional use
• The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm
• Protection class IP 40 Spray-water-proof display and membrane keyboard
• Tested in accordance with DIN EN ISO 6789-2:2017
• USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC
• Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector
• Including 1 metre USB 3.1 / A-C cable

• Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable
• Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK)
• Display deviation in right and left torque: from ±1% / ±1 digit
• Display deviation in right and left rotation angle: ±1% / ±1°
• Rotation angle range adding: 0 to 999°
• Torque tolerance for OK display (green): adjustable ±1 to 10%
• Rotation angle tolerance for OK display (green): adjustable 1 to 90°
• Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m
• Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements)
• Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around
• Threshold value, pre-warning level: adjustable 50 to 99%
• Adjustable signaling, On/Off audible signal (buzzer) and vibration
• Reset function, restore to factory setting
• Stand-by time: adjustable 1 to 10 min.
• Indication of battery condition and memory
• Memory capacity, including date and time: up to 3000 measurements
• Offers possibility to program flow charts and sets of parameters: 25 and 25
• 2 control functions: programmable torque control for angle tightening and angle control for torque tightening
• Menu locking against unintentional change, four-digit code is personally selected
• Display of the software version with serial numbers, calibration date and service display / usage counter
• Menu languages: German, English, French, Italian, Chinese
• Optional on request: Programming and evaluation software for laptop and PC
• SmartTAC app for Android end devices
• In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification
• The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request.
• For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface.
• Release accuracy tolerance according to ISO 6789-2:2017
• Made in Germany
• Total length: 520 mm
• Output: Insert square 14 x 18 mm, Square, solid 12.5 mm (1/2 inch)
• Net weight: 1.1 kg

Technical data:

• Actuating force min.-max. kg : 4.1 - 40.7
• Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable
• Effective torque wrench length min. I1 mm : 464 mm
• lbf min-max : 15 - 150
• Length : 520 mm
• Net weight : 1.1 kg
• Nm min-max : 20 - 200
• Number of batteries : 1
• Number of teeth : 32
• Opening angle : 11.25 °
• Output : Insert square 14 x 18 mm, 1/2"
• Standard : Release accuracy tolerance according to ISO 6789-2:2017
• Tightening torque max. : 200 Nm
• Tolerance : 1 %
• Torque max lbf.ft : 150 lbf.ft
• Torque min lbf.ft : 15 lbf.ft
• Torque min Nm : 20 Nm
• Total length : 520 mm