Brake Fluid Gun, 1,2 l Container

Brake Fluid Gun, 1,2 l Container

Features:

• Aspiration from the liquid via vacuum
• Beaker capacity: 1,2 l
• Brake fluid replacement without assistance
• Air consumption: max 180 l/min at 8 bar
• The vacuum (min 60 %), produced by the gun, reliably sucks the old fluid off from any brake or clutch system
• For all hobbyists & tinkerers we explicitly point out:
• There is an additional compressor required!
  • What this gun does:
    • Change brake fluid
    • Aspiration of brake fluid
  • What this gun does not do:
    • Aspiration without vacuum bubbles
    • Only at its color or quantity you will recognize, if the old fluid was actually aspirated!
    • There will always (no matter what the manufacturers will tell you in their instructions) be air sucked in between the rubber nipple of this gun and the bleed nipple of the vehicle (or the dissolved thread of the bleed nipple).
      This bubble-shaped air will then be visible inside the suction hose
    • But this is NOT a problem, as this happens outside of the brake system and only when negative pressure is being applied.
      • If you want to see blistering leaks inside the brake system, this will only work, if you push the new fluid through the brake fluid reservoir of the vehicle. Accordingly you need an extra device, which you will also find in our offerings, such as the Rodac RQN4080 for about 375 - 400 EUR (depending on supply).
        • Our brake fluid gun was only designed for the replacement of brake fluid , but not for fault diagnosis or the repair of brake systems!